Call Us (209) 599-6118

How to Create Your Own Dog Mask – The Fundamentals

In this report we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and techniques which you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the garden and other regions of the house, you need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup which will look a little scary at first, but it is really very simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you will need to cut around the edge of the mask so you get something which looks like a cone. The most important thing here is to be realistic with what kind of paper plate that you’re using.

Then you will need to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so that you can ensure that nothing will leak once you put the mask on. Make sure the edges are cut so the edges http://aseema.seeyourimpact.org/?p=8010 aren’t sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck into your mask. It’s easy to remove it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint after you are done, so you don’t wind up with smudges or smears on your dog.

Then it’s time to paste the mask onto your dog’s head. First you will need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you can start to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the base of the mask and then fold it over. Be sure that it’s quite strong and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you have the mask snugged securely onto the face of your dog. Don’t make the folds too big or else it might look messy. As soon as you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask on the dog. Be sure that the ears are level and make sure that it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.

If you are using a dog mask because your pet security, you’ll need to do some sanding to make certain it is safe on your dog. You can do it by sanding off any excess paper that may have been eliminated from your mask.